Aerosun 3.4cbm Cgj5071gxee4s Excrement Collector/Vacuum Truck

• Customization: Available
• Certification: ISO9000, CCC
• Emission Standard: Euro 4
• Model NO.: CGJ5071GXEE4S
• Transmission Type: Automatic
• Fuel: Diesel
• Condition: New
• Trademark: Aerosun SanLi
• Origin: China

Product Description

Aerosun 3.4cbm CGJ5071GXEE4S Excrement Collector/vacuum Truck
 

 

Type of CGJ5071GXEE4S excrement collector/vacuum truck is mainly used for the sanitation department to suck and transport of excrement and other sewage. It is refitted on the chassis of class II truck. By manipulating the vacuum pump, a certain vacuum degree is obtained in the liquid tank, and then excrement is sucked into the tank. There are two ways of discharge: pressurized discharge and artesian discharge. A float ball device is installed in the tank, which can play a certain early warning role in preventing the overflow of excrement.
 

1.Technical Performance Specifications

Chassis	Model	QL1070A1HWY
	Wheel base(mm)	3360
	Engine	4KH1-TCG40,Euro 4
	Power(Kw)	88
	Displacement(mL)	2999
	Max. speed(Km/h)	105
Dimensions	Overall dimension (L × W × H) (mm)	5620×1880×2475
	Wheel base(mm)	3360
	Front/rear overhang (mm)	1015/1245
	wheel tread (front/rear)(mm)	1504/1425
	Approach/departure angle (°)	20.5/20
Quality	GVW(Kg)	6725
	Curb weight(Kg)	3350
	Rated load(Kg)	3050
Special device	Effective volume (L)	3400
	Tank size (mm)	1536×1168×2500
	Suction depth (m)	≥4
	Filling up time (s)	≤300
	Emptying time (s)	≤240
	Vacuum pump type	A43D
	Rated speed (rpm)	600
	Rated air flow rate(L/min)	2580
	Limit Vacuum (MPa)	-0.097

 

2.Main parts

2.1 This vehicle is mainly composed of chassis, tank assembly, left and right hose box, gas system, hydraulic system, suction device, discharge valve, frame tank body (optional assembly of some models) and so on.

2.2The main components of the gas system are: anti-overflow device, four-way valve, crude oil and gas separator, oil and gas separator, water and gas separator, vacuum pump and lubrication system, deodorizer (optional assembly of some models).

2.3The discharge valve is DN150 ball valve, optional additional reducer or electric actuator.

2.4 Equiped with a rotating suction head, and the length of suction hose is 5m.

3.Main features

3.1 The liquid tank is welded of 4mm steel plate. The cross section of the tank is ellipse. There are reinforcement rings and anti-wave plates welded in the tank to strengthen the stiffness of the tank and reduce the impact of liquid in the tank on the tank bottom during driving. The inner surface of the tank is coated with EPSP403 solvent-free epoxy phenolic paint, which has excellent anti-corrosion performance.

3.2 The rotary vane vacuum pump, imported from Japan, has the advantages of small noise, large suction, low fuel consumption and long service life.

3.3 The anti-overflow device in the gas system can prevent sewage from entering the gas circuit due to full suction and damage to the vacuum pump system.

3.4 The crude oil and gas separator, oil and gas separator and water and gas separator in the gas system realize secondary separation to ensure the thorough separation of oil and gas, water and gas in the pipeline and ensure the safe and efficient operation of the vehicle.