Aerosun 12000L CGJ5183GQXE5 high pressure flusher
Intelligent variable speed power system
1.Standard configuration
High pressure part: front spray frame, left and right Angle spray, rear spray
Low pressure parts: left and right front flush, left and right rear spray
2. Main Technical specifications
| Parameters |
Overall dimensions (L×W×H)(mm) |
Curb weight(Kg) |
Rated capacity of tank(L) |
| 9375×2500×2840 |
8100 |
10200 |
Chassis model:DFH1180BX1V Engine Model: ISD210 50, Euro 5
Power:155kw GVW:18000kg
Wheel base:4500mm Geometric volume of tank (L):12000L
High-pressure plunger pump:
Max. Pressure 10.0 MPa
Theoretical discharge:153 L/min
Low pressure waterway:
Flow rate of water pump(m3/h):50
Head of delivery(m):110m
Watering capacity(L/m2):0.5~2
Watering width(m):≥14
High spray height(m):≥36
Sprinkler drive mode:pneumatic
Cleaning width(m):2,3.5(Water spraying rod swing)
Angle of avertence(°):±15
3.Vehicle features
1. The new high pressure flusher replaces the power system of the traditional auxiliary engine with the intelligent variable speed power system. Compared with other high pressure flusher in China, the vehicle has the advantages of low noise, less fuel consumption (30% reduction), intelligent electronic control system, low cost, convenient maintenance and lightweight, etc.
2. This vehicle has independent high and low pressure cleaning water system. High pressure waterway adopts high pressure plunger pump imported from Italy, which has excellent performance and reliable operation. The low pressure water pump adopts domestic famous brand water pump, high efficiency, large flush width, long range of water gun.
3. The high-pressure water produced by the high-pressure water pump is ejected through the high-pressure nozzle of the water spraying rack, and the kinetic energy of the high-pressure water jet is used to clean the road in a way of high pressure and low flow. It is characterized by strong deconvolution, efficient water-saving, and can clean the old stains on the road surface. Or through the left and right corner spray, clean the kerb sidewalk and guardrail isolation area. The rear spray system has the powerful function of spraying dust and spraying air disinfectant and adjusting air humidity.
4. Front and rear sprinklers with different characteristics of low-pressure waterways, front sprinkler nozzle is suitable for flushing road surface, rear sprinkler nozzle is suitable for sprinkling, dust removal and cooling.
5.Easy to operate, can be "easy to shift", the new model uses friction clutch force, can achieve free shift, simple operation, more humane.
6.Intelligent control, one key operation, the new model uses a specific electronic control system, connected and disconnected force remover is no longer subject to the vehicle state, parking and driving can be connected or disconnected force remover at will, more intelligent, more safe.
7. Extended service life, the new cleaning car through the specific electronic control system to the engine speed limit, and then control the pump input speed, prevent overspeed, extend the service life of the pump;
8. The spray rack is equipped with the main spray rod and the left and right spray rod. The left and right spray rods can be independently controlled to expand and contract. When extended, the width is 3.5m and the washing range is wide. At the same time, the spray rack can be lifted and rotated around, and the maximum deflection angle of left and right is 15°, the spray frame is collision proof.
9. Both ends of the spray frame are equipped with lifting width light, which can raise the width light pole during operation to ensure the safety during driving.
10. The high-voltage waterway and circuit system adopts or draws lessons from the advanced technology of Japan, and is equipped with electrically controlled display monitoring instrument and low-limit liquid level alarm signal lamp to avoid idling of high-voltage pump when there is no water. At the same time, the high-pressure waterway system is provided with double protection of safety valve and automatic unloading valve.
11.The vehicle adopts modular design, which is simple and convenient for maintenance. At the same time, the pipeline system is enclosed in the cabinet, which will not be affected by the environment, ensuring the safety of use. Dongfeng chassis, excellent performance.
12. Cancel the auxiliary engine, reduce the maintenance and fault points, reducing the use cost.
Audited Supplier 
){kind=link}