Aerosun 10000L Cgj5127zys Back-Loaded Garbage Truck Euro3

• Customization: Available
• Type: Compactor
• Certification: ISO9000, CCC
• Model NO.: CGJ5127ZYS
• Emission Standard: Euro 3
• Transmission Type: Automatic
• Payload: 20T
• Fuel: Diesel
• Models: Large
• Usage: Dump, Swing Arm Type, Sealed, Hang Barrel Type, Arm Type, Compression Type, Eat Hutch Type
• Condition: New
• Trademark: Aerosun SanLi
• Origin: China

Product Description

CGJ5127ZYS back-loaded garbage truck

The CGJ5127ZYS back-loaded garbage compactors are specially used for collecting and transporting municipal domestic waste or other compressing waste. The trucks have electric hydraulic control system, crushing and densification mechanism, with high compression ratio and large load capacity. The collection and carriage of waste is hermetic without secondary pollution.
Notice: It is strictly prohibited to collect building garbage and industrial metal garbage.
 

1.Main Technical Specifications
 

Product Name	Compression Refuse Collector
Product Model	CGJ5127ZYS
Brand	Sanli
Manufacturer	Aerosun Corporation
Chassis Model	HFC1120K1R1HT
Chassis Brand	JAC
Chassis Name	Cargo truck chassis
Engine Model	CA4DF3-17E3	Engine Power	132Kw
Engine Displacement	4752ml	Emission Standard	Euro 3
Fuel Type	Diesel	Engine Manufacturer	FAW
Overall Dimension (L*W*H)	Type 1- Dustpan mechanism 8080×2495×2955mm	Type 2 and Type 3- Trash can-lifting mechanism 8250×2495×2955mm
Container Rated Volume	10 m3	Operation system	Full-automatic
Dimension of fill inlet	1680×880mm	Height of fill	≤1020mm
Time of effuse push-out	≤20s	Filling cycle	≤18s
Tank volume (reference)	176L	GVW	12490kg
Curb Weight	8200kg(Dustpan mechanism) 7970kg(Trash can-lifting mechanism)	Rated Payload	4095kg(Dustpan mechanism) 4325kg(Trash can-lifting mechanism)
Approach /Departure Angle	19°/18°	Front/Rear overhang	1530/1010mm
Axle Base	4000mm	Axle Load	4375/8115kg
Number of Axles	2	Max. Speed	90 km/h
Number of Leaf Spring	9/9+7	Tires No.	6
Tire Size	9.00-20	Front Track	1830mm
Rear Track	1800mm

2.Advantages and Characteristics

2.1 Beautiful appearance, and the tank body adopts circular arc plate structure and streamlined design, without reinforcing bars.
2.2 The mode of compression adopts bi-directional compression, and the compressed garbage is evenly distributed.
2.3 The mode of operation adopts automatic dual-control operating system, garbage compression has two actions of single action and continuous action.
2.4 The electrical and circuit system of the vehicle adopts programmable PCL computer automatic control mode
2.5 The computer board adopts international famous brand imported from Japan. It has the function of fault alarm and display, which can quickly judge the fault of the vehicle. It also can realize the continuous curve of engine speed, realize the function of automatic acceleration and deceleration of engine, reduce noise and fuel consumption;
2.6 Key electrical components imported from Japan -- control box, inductor, plug-in, cable, switch, etc.
2.7 Equipped with Japanese imported quality brand automatic acceleration and constant speed device for engine.
2.8 The hydraulic components adopt the products with high reliability, among which the hydraulic control valve, the full set of oil cylinder, the full set of high pressure hose, the full set of hydraulic pipeline, the hydraulic oil tank and the connector all are imported from Japan
2.9 Advanced design, simple operation, reliable work for the hydraulic system, it can realize the process of lifting for the loader and discharging garbage by pushing plate through the cab control, also. it can realize to clean up the residual garbage in the loader.
2.10 The joint of the loader and the tank body must be reasonably structured, it adopts the tight sealing technology of hydraulic lock, uses the sealing groove and sealing rubber strip imported from Japan, and have good sealing performance
2.11 The steel plates for making the tank body and the loader are Japanese weathering steel plates with good corrosion resistance.
2.12 The slide track in the loader adopts integrated precision casting guide rail imported from Japan, underground natural aging for 5 years. Skateboard adopts roller mode, and the roller adopts imported brand.
2.13 It can equipped with a garbage container or buckets turnover mechanism.